Sunday, September 16, 2012

Sami Bracelet - The Tutorial

Here comes the long promised complete tutorial on how to make your own Sami Bracelet. In the example I'm making a four strand braid with two skin inlays but you can of course use any braid you want and feel comfortable making. Please read the entire tutorial before starting, because it's quite a few steps and some of them are easier to understand if you've read the following steps. This is the bracelet we'll be making.





Step 1 - Materials


You will need:



* Tin/Copper Thread (I generally use the 0.40 thickness)
* Leather
* Synthetic Sinew
* Nylon Thread
* Hobby Glue that dries clear
* Button 
* Thimble
* Sewing supplies such as needles, a measuring tape, cutting mat, quilt ruler and rotary cutter if you have, scissors.

All the supplies you need can be found at TNKreativt which is where I shop, they ship all over the world and their customer service is great =)

Step 2 - Making the 4 Strand Braid

You can of course make any braid you want here, I'm going to show you how to do a simple 4 strand braid with double skin inlays. How much skin and tin thread you'll need depends on how long braid you want to make and your braiding technique, but for a normal bracelet (2) ca 24" long tin threads and 2 12" long and 1/8" wide skin "threads" is usually more than enough. You can buy the skin already cut if you don't have a cutting mat as I don't recommend trying to cut them with scissors, they never come out even enough to look good.

Fold the long tin threads in half and attach them to your braiding surface with for example pins on cardboard, or like me with a safety pin in a couch pillow ;)  I've colored the strand we're moving pink to make it easier to follow.


Braiding:
I've started a bit down in the braid as it does look a little confusing in the beginning.
Start with the every other strand double tin threads and every other one leather. It's a very simple over under weave to do a four strand braid. Just be careful to keep your double strands flat and never crossing each other throughout. 

1. Start with the left strand (coloured pink for visibility).



2. Lift it over the closest set of tin threads.



3. Move it under the leather strip.



 4. Finally lift it over the last set of tin threads. Tighten and continue from step 1 with the double tin threads which now will be furthest to the left: over - under - over.



If you're having issues getting the braid equally tight all over, try stopping at this step and tightening it before continuing.



Step 3 - Preparing to Attach the Braid

Synthetic sinew is quite thick when you buy it and will never fit through a regular sewing needle. Therefor you need to separate it into smaller sections like you would do with embroidery floss. This can be a bit tricky, but depending on the thread it will quite naturally separate in to 3-4 strands.



Cut your leather piece for attaching the braid, myself I wanted quite a bit of leather on both sides of the thread for this so I cut mine 1 1/4" wide. You can of course make it thinner and more elegant, then double the width of your braid and add a generous 1/8"  extra and use that width. I use a rotary cutter and quilt ruler for this to get nice, even edges. Cut it the same length as the wrist circumference of the future wearer. Don't cut it shorter as then it will be very tight.



Roughly ½" from the edge on both sides, make a little cut in the center of the strip just big enough to press the braid through. Don't make it too big, it's better to have to enlarge it. As a beginner though it might be easier in the following steps if you  move the cut 3/4" in from the edge, as it will give you more room for knots in later steps.


Tie off both of the ends of your braid and cut it just 1/8 of an inch or so shorter then the leather.



Step 4 - Gluing the Braid to the Backing

We're ready to attach the braid. Insert the ends of the braid into the cut openings from the right side. Hold the leather like in the picture and dab a little glue on the back side of the braid.




Straighten it out and press the braid down onto the leather, wipe away any excess glue with a moist cloth. Make sure none of your knots are visible at the front of the bracelet, leave to dry for as long as the glue states it takes to dry.



Step 5 - Attaching the Button

Choose a pretty button that fits your bracelet, I usually prefer antler buttons for their traditional looks - but I've tried everything from plastic to pearls, just play with it, there's no right or wrong, it just have to be able to hold the loop.

Thread your needle with 1/4 of a synthetic sinew strand from the ones we separated before. You might want to use a special leather needle if you have one, but it's not necessary if you just have a good quality needle and a thimble.

In one of the tin threads on the back, insert your needle and pull the thread through and tie the end of your thread to that with at least a good double knot. Leave about 2 or so inches for a thread end, as we'll use it later.



Then bring up your needle just to the right side of your braid. Add your selected button and stick it down again just to the left of the braid. The reason we're doing it around the braid is because this way we help attach the braid to the skin to prevent it from moving, and button is attached to something more sturdy than just the skin. As otherwise the button might rip through the skin after a bit of wear. 

Repeat three or so times until it's well in place, try to use the same holes in the leather to not perforate it needlessly.



Then pull up your thread to the side of the button underneath it, and wrap the thread around the button about three times before sticking it back down to the backside of the braid, still in the same holes if possible.



Then you tighten it all and tie your thread together with the end of the one you tied to the tin with at least a good double knot.



Step 6 - Making and Attaching the Button Loop

Now we'll make the little closing loop from a leather thong. Cut a 1/8" wide and ca 4" long piece of leather.



Clip it open (I do this with my finest scissors as it's too thin to use the rotary cutter, and it doesn't have to be perfectly even) almost all the way through but leave a scant inch uncut. Then wet it thoroughly with regular tap water. Take the clipped ends and twirl them in different directions between your fingers. It is usually easiest if you ask someone to help you.


When it's twirled up really tight, grab the uncut piece, bring the two twirled ends together and it'll roll up to a little thong. Tie it off properly like I've done in the picture with a strand of synthetic sinew and make sure the loop is big enough to go around the button and has a little extra too.



Take the little loop and cut off the excess ends about 1/4" below the knot. Tie one of the ends through the tin in the braid like we did with the button (this will make sure you can't pull out the loop later). 

Tie the loop up tightly and thoroughly around the braid, tie off.



Step 7 - Sewing the Braid to the Backing

Just gluing the braid in place will not last you very long so now we'll properly attach the braid. The glue is mainly there so you can manhandle the braid a bit when sewing it down, without risking it ending up off center.

Take a fairly long piece (about three times the length of your bracelet) of clear nylon thread. Tie one end to your needle (as otherwise you'll be retreading it all the time, it's a slippery bugger ^^) and the other end to a piece of tin like with the button.

Stick up your needle where you see the nylon thread coming up in the picture and then stick down the needle in the way show in the photo. Do it at an angle in under the braid, not next to it as then the holes from the needle will show. I've drawn little black lines where I sewed mine in place. The reason I did it there was so I could nestle the thread in under the skin inlays (or if I didn't have skin inlays, in between the tin threads) to make it invisible. I do one side first and then come back up the other side.



When you've come back up, tie the threads together with the one you first tied with the tin with a bunch of knots to make sure they won't unravel. Hopefully it'll be visible in this photo.



Step 8 - Closing up the Bracelet
 
Now we're going to sew up the bracelet to finish!
Again, thread your needle with synthetic sinew. Tie one end to a piece of tin (yep, lots of knots there by now) and then stick up your needle from the back to the front in one corner of the braid.



Next bring it over to the other side, this will look a bit off but tighten them so the edges come together and poke a bit at the first corner to make it come up. 



Then dab a little glue on all your knots so they'll for sure stay in place forever, and then start stitching like in the photo with the glue still wet (yep needle will be gluey but it will be worth it). From the  underside and up and then back over from the underside again.



When you're nearly at the end, dab a little glue over your knots again and stitch nearly to the end.



The last stitch you do like the first one straight over and do a couple of stitches in the same place to hold it and then stick the needle into the braid and up further down between your seams and cut the thread there.



Press down on the ends of the braid to get the glue all the way down to the edges and get a neat end. Clamp your ends closed with a clothespin, wonder clip or your fingers until it's somewhat dry - to get your loop centered. If you skip the wonder clips and are in a hurry to get a nice photo of the tutorial you just finished, you'll most likely end up with an off center loop like I did! So please don't do as I do, do as I say ;)

Finished!



Pat yourself on the back! You've done a fantastic job!  =D

Now you'll actually have to "wear in" your bracelet. This as the leather will be a bit unruly at first, so be careful when you put it on the first few times. Making sure the braid is in the center, and press on it a little to make sure it stays perfectly centered. After you wear it a few times it'll stay place on it's own, and you can just throw it on like any other bracelet.

Enjoy your stunning new bracelet and make many more in different colors so you can mix and match! =)



Feedback on this tutorial is much appreciated and please don't hesitate to ask if anything is unclear! I truly believe you will love making your own, unique Sami Bracelets =)

If you make your own Sami Bracelet or anything from a pattern or tutorial of mine - I'd love if you add it to my Facebook Group and thereby share it with me and the world so we all can enjoy it and be inspired by it.  And don't hesitate to tag me if you post on instagram @pink_pony_design <3

Thursday, September 13, 2012

Simply Mental Stars

Can you forget a quilt top you spent hours and hours on no less then 2 months ago? Well I managed XD The top I named "Simply Mental Stars" was neatly folded away for a photo opportunity later when I got home from the quilt retreat and I completely forgot about it until I saw a similar star on Pinterest yesterday.

Anyhow, introducing Simply Mental Stars:




Didn't have time to take it outdoors and this photo is as close to the actual colors as I could get.


It was really fun to make the stars, the crazy stars require minimal attention and you can make them as "mental" as you'd like =) 

It's made from half a Tonga Treats, Strip Treat - Hard Candy roll. I'm planning to use the rest for borders. It didn't turn out at all like I planned as I ran out of the black fabric so I'm really back and forth when I look at this top. Sometimes I like it, others not at all, it comes and goes. I was planning on adding a skyline applique to the bottom but for now I think I'll fold it back and let it "mature" for a while until I have time to decide what to do with it and then take it from there.

Monday, September 10, 2012

A Rainbow Stash Update!

 Since I've been sick for nearly a month, and covered in work on top of that I haven't got anything creative to share. So I took out my new, oh so pretty rainbow of fat eights for a little photo session, so I would get to stroke some fabric at least ^^




Aren't they just gorgeous!?
I can't beleive such a stunning pile is acutally MINE =D

I just can't wait to get time to start on my color wheel wall quilt I have planned for these beauties! But until then I'm perfectly happy just being able to pat them and look at them from time to time. You've got to love that about fabric, it makes you happy even when you haven't got time to play with it =)

Thursday, August 23, 2012

A cellphone case for a friend

My "prototype" cellphone case will be getting a new home with a dear friend. I made two when I made mine, the first one was unfortunately too small, forcing me to make a second, larger one to accommodate my big phone. The prototype is however the perfect iphone size so it'll hopfully be great for my friends phone. It's a bit daintier then mine and I actually really like this first version better, but what to do when your phone is to fat? ^^



And since she's just as crazy about frogs as Anki is, I couldn't help but use up a small amount of my adorable frog fabric from my previous post for her. I'll show you what I made with it after she receives it, as I want it to be a little surprise and I can't be sure she wouldn't see it here ^^

~~~~~~*~~~~~~

I also received an email from Jennifer the other day who had made a Charming Rag Quilt using my Moda Bakeshop Tutorial. Isn't it just lovely! Love how manly it looks while at the same time looking so snuggly! She used  3 King of the Ranch charm packs, a Texas panel and some various western fabrics she had at home to give her a total of 168 squares.

  
Thank you so very much Jennifer for sharing your beautiful creation with me! <3

Thursday, August 16, 2012

Beautiful Gifts & Summer Squares

I just want to start out by saying that I'm so lucky to have so many wonderful people in my life!

When I was at the quilt retreat this summer, I fell in love with some adorable fabric Anki was sewing equally adorable things with, really cute frogs (she loves frogs!) and beautiful matching fabrics. And when she'd finished up her things she was making with it, she gave what she had left of all the fabrics to me! I was so happy! I can totally see all the cute little baggies I'll be making from these! Thank you so very much Anki! <3 There where a lot more then what can be seen in the pic.


On the same note my beloved mother (who is much to generous for her own good) saw me swooning over her Puttin' on the Ritz jelly roll, as I had no idea what pretty, non childish fabrics this collection contained! Such stunning fabrics. And she gifted it to me! I can't stop looking at it, I know I want to make something stylish for the living room with it, I just don't know exactly what yet ^^
Thank you so very much mom, you know how much I love you! <3


~~~~~~~~~~*~~~~~~~~~~

A couple of days ago I also received  an email from Tina Leahy who had made her own, stunning version of my Summer Squares Quilt from the tutorial found on Moda Bakeshop. Isn't it stunning? I love what she did with the little thin green border to frame it all before adding the big border to give it a more usable size, she shared with me that she got the idea from Sew'n Wild Oaks Blog.


Thank you so very much for sharing your beautiful creation with me Tina!

Saturday, August 11, 2012

Revisiting Cubes Revisted ^^




I'm competing in this weeks Quilting Gallery contest under the theme Modern Geometric with my Cubes Revisited Wall Hanging. You can read a bit more about it and see some additional photos in the original post.


I'd like to ask you all to hop over there and vote for the ones you feel deserve to win. You get three votes this week so I'm hoping of course that my little quilt (it's actually little, only 19,5" square) will stand up to the incredibly fierce competition and maybe get one of your votes ^^

Monday, July 30, 2012

Cellphone & Earphone Cases

During this years quilt retreat Anki was making adorable cellphone cases, my mother made one too and soon everyone was making them, they're so cute and I of course had join the club =)


I made mine in Ruby by Bonnie & Camille. I'm glad it has a lid as I tend to drop my phone now and then and in this case it won't get hurt at all. =) The hanger on the earphone case is giant rick rack and the little chameleon on the zipper was a gift from a dear friend.

 

It's a super handy little case thanks to the little pocket on the front, perfect to stuff a little cash and a credit card in so one doesn't have to bring ones entire purse for a quick shopping run. My earphones exactly fits in the little case so it doesn't take up any more room then absolutely necessary and the clips at the tops makes them super easy to attach to one another and then hang in a belt loop.
 

Sunday, July 29, 2012

Sunday Stash = Stash Stack Club!

Today my first shipment of Stash builders arrived from Pink Castle Fabrics and I couldn't be happier! Such lovely fabrics and such a wide range! My favourites are the one at the top and the criss cross one second from the right, so pretty!


I'm a huge fan of Jeni from In Color Order,  I love her work and her amazingly inspiring blog. I've been following her Art of Choosing series rigorously and I've really been trying to learn how to stash smartly as nearly all the fabric in my teeny tiny stash are impossible to use - as I had no clue what I was doing back when I bought them. =)


So when she announced the Stash Stack Club which she and Pink Castle Fabrics where organizing I immediately knew I wanted to take part, oh so badly! However, the issue was Malta and their darn customs, it's a whole issue that can takes days and numerous visits to the post parcel office (which is located in a desolate spot on the island so I have to take a taxi there making it very costly too) to get the things one has ordered and paid for. Luckily the awesome people at Pink Castle allowed me to do a test month which went splendidly as they'd packed the shipment flat enough to go directly in my mailbox and I didn't have to go to the customs office at all! Thanks a lot and I can't wait for the next months shipment! =)

Pink 

Castle Fabrics

Friday, July 27, 2012

I love Panduro Hobby!


Especially when they're selling gorgeous Tilda Fabrics at 50% discount! When I was in Sweden for the quilt retreat they had summer sales and lucky me managed to score some beautiful Tilda fabric and various tools and notions at 50% off. Made for a very happy Maria, especially when you look at the adorable color matching pom poms! Seriously, how cute are they? Bought ½ yard of each fabric except for the greens where they only had one of each FQ left.


I also found some adorable cotton lace, intended for scrapbooking but I'm sure it will work lovely in sewing projects too. ^^


And this is such an adorable little eyelet puncher and the most teeny tiny eyelets in such adorable colors! Can't wait to try to include these in some projects!