Wednesday, September 26, 2012

I think I love fall, and I know I love my mom!

Cut to Pieces was having a giveaway and she only asked us to tell her what we like about fall. And as I was preparing to write that I hate fall (I used to have what I can only call fall time depressions when I lived in Sweden), I realised that nowadays, here in Malta I think LOVE the fall!

A bit of rain falls from time to time giving me reason to stay inside and sew a bit more while the island is slowly turning from burnt out brown to a healthy green. I love that I can walk outside without getting drenched in sweat and I love that I don't have to shower after a walk to the store =) I love that I get to wear a bit more clothes, while "as little as humanely possible and still somewhat decent" is fun for a few months it get's boring after a while.  I love that the quilts on the couch soon no longer will be purely for decoration purposes but soon will be used to snuggle up under. I love lighting candles, making stews and actually feeling like cooking. Don't get me wrong, I still love summer more then anything but I think I've found there's enough  room in my heart to love fall too =)

The image has nothing to do with anything other then that I came to think about this photo session a number of years back with our much loved goddaughter Alma so I thought the image would be appropriate =)

But what I do know I do love is my mother! And no, not because she sends me lovely things, that just makes her even more awesome. A while back this little packet came with the most adorable fabric and a bunch of equally cute buttons and notions! <3 And Anki who is just as sweet as my mother had ordered an awl for me. I've been looking for the really thin clover awls which I haven't been able to find anywhere so she ordered it for me! Thanks mom and Anki, you are the best!

Monday, September 24, 2012

Stash Stack Club - September

I just received my September Stash Stack from Pink Castle Fabrics! Like with the July one, I couldn't possibly be more pleased with the fabrics or the fast shipping! Sadly my August stack has gotten lost in transit somewhere... But I haven't given up hope yet! =)

The fabrics are lovely, the variations of the color is really wide and the fabrics are so modern and fresh feeling! My favorite this time around is the Kiss Dot in Aqua (Michael Miller Fabrics) for sure tightly followed by the Clown Stripe in Aqua (Michael Miller Fabrics), but all are truly gorgeous! =)

The stash stack club is so much fun, it's like Christmas once a month and since the kind people over at Pink Castle packs mine so flat, I can pick it up directly in my mailbox with no hassle from customs! <3

Friday, September 21, 2012

A Little Froggy Heart

Remember this post about the cellphone case for a friend? The package arrived so I can finally share the little froggy coin purse I made for her with a little of the fabrics I received from lovely Anki, possibly the only person in the world as frog crazy as Tracy =D

Had a tricky time with the heart shape, it got all wonky when I added the zipper and it took me some time to figure out how to draw the heart pieces to make it work, but it was a really fun learning experience. =)

Wednesday, September 19, 2012

Color Wheel Quilt - It Has Finally Begun!

This is a project I've wanted to do for YEARS. I've always loved all those gorgeous color wheel quilts out there! I've been planning this in my head for soo long and I knew I wanted to do something unexpected and new. There's a lot of stunning ones out there and I didn't want to risk replicating a design already out there. So I ended up going with something a bit more unusual (I hope! I haven't seen anything similar at least ^^). The reason I chose this version of the color wheel was because I not only intend to use it for decoration but for actual color picker help in my sewing area. So here's the beginning, the center of my color wheel quilt.

I used this tutorial from Sew Mama Sew to make my pattern. As you can see I used my Tonga Treats, Strip Treat - Hard Candy strips for this so I had to sew them together to fill the space I need them to fill. Now I'm terrified that I've missed some step in this whole piecing curves thing that will make my center or outer ring unusable... But we'll just have to wait and see =)

I'm still waiting for my white fabric to arrive so this is actually at a bit of a standstill right now, which might be good as I'm currently considering what I want to do in terms of border for it. If I had the background fabric here now, knowing myself I'd probably already be quilting it! Any suggestions are most welcome.

I've picked out all the colors I want for the actual wheel part of the quilt too, that was sooo much fun!

The only ones I'm not perfectly happy with are the greens, but they will do =)

Tuesday, September 18, 2012

Simply Solids Under New Ownership!

Simply Solids have changed hands! You can read all about it here over at Justines Blog Sew Justine Sew. As a quilter I'm always happy and excited about great fabric stores and Simply Solids truly is one. And Justines plan is to make it even bigger and better!

Why not hop over to Justine's blog to to show your support for her in her new venture? =)

To celebrate this new beginning for Simply Solids, until midnight on Saturday 22nd you get a free Fat Quarter with every order.


On a more personal note the queen of the house received a shower and thorough cleaning and is now all daisy fresh. Luckily she likes taking showers and getting blow dried, just not all the "washing" she has to do herself after the blow dry nor when I take embarrassing photos of her all wet. =)

Sunday, September 16, 2012

Sami Bracelet - The Tutorial

Here comes the long promised complete tutorial on how to make your own Sami Bracelet. In the example I'm making a four strand braid with two skin inlays but you can of course use any braid you want and feel comfortable making. Please read the entire tutorial before starting, because it's quite a few steps and some of them are easier to understand if you've read the following steps. This is the bracelet we'll be making.

Step 1 - Materials

You will need:

* Tin/Copper Thread (I generally use the 0.40 thickness)
* Leather
* Synthetic Sinew
* Nylon Thread
* Hobby Glue that dries clear
* Button 
* Thimble
* Sewing supplies such as needles, a measuring tape, cutting mat, quilt ruler and rotary cutter if you have, scissors.

All the supplies you need can be found at TNKreativt which is where I shop, they ship all over the world and their customer service is great =)

Step 2 - Making the 4 Strand Braid

You can of course make any braid you want here, I'm going to show you how to do a simple 4 strand braid with double skin inlays. How much skin and tin thread you'll need depends on how long braid you want to make and your braiding technique, but for a normal bracelet (2) ca 24" long tin threads and 2 12" long and 1/8" wide skin "threads" is usually more than enough. You can buy the skin already cut if you don't have a cutting mat as I don't recommend trying to cut them with scissors, they never come out even enough to look good.

Fold the long tin threads in half and attach them to your braiding surface with for example pins on cardboard, or like me with a safety pin in a couch pillow ;)  I've colored the strand we're moving pink to make it easier to follow.

I've started a bit down in the braid as it does look a little confusing in the beginning.
Start with the every other strand double tin threads and every other one leather. It's a very simple over under weave to do a four strand braid. Just be careful to keep your double strands flat and never crossing each other throughout. 

1. Start with the left strand (coloured pink for visibility).

2. Lift it over the closest set of tin threads.

3. Move it under the leather strip.

 4. Finally lift it over the last set of tin threads. Tighten and continue from step 1 with the double tin threads which now will be furthest to the left: over - under - over.

If you're having issues getting the braid equally tight all over, try stopping at this step and tightening it before continuing.

Step 3 - Preparing to Attach the Braid

Synthetic sinew is quite thick when you buy it and will never fit through a regular sewing needle. Therefor you need to separate it into smaller sections like you would do with embroidery floss. This can be a bit tricky, but depending on the thread it will quite naturally separate in to 3-4 strands.

Cut your leather piece for attaching the braid, myself I wanted quite a bit of leather on both sides of the thread for this so I cut mine 1 1/4" wide. You can of course make it thinner and more elegant, then double the width of your braid and add a generous 1/8"  extra and use that width. I use a rotary cutter and quilt ruler for this to get nice, even edges. Cut it the same length as the wrist circumference of the future wearer. Don't cut it shorter as then it will be very tight.

Roughly ½" from the edge on both sides, make a little cut in the center of the strip just big enough to press the braid through. Don't make it too big, it's better to have to enlarge it. As a beginner though it might be easier in the following steps if you  move the cut 3/4" in from the edge, as it will give you more room for knots in later steps.

Tie off both of the ends of your braid and cut it just 1/8 of an inch or so shorter then the leather.

Step 4 - Gluing the Braid to the Backing

We're ready to attach the braid. Insert the ends of the braid into the cut openings from the right side. Hold the leather like in the picture and dab a little glue on the back side of the braid.

Straighten it out and press the braid down onto the leather, wipe away any excess glue with a moist cloth. Make sure none of your knots are visible at the front of the bracelet, leave to dry for as long as the glue states it takes to dry.

Step 5 - Attaching the Button

Choose a pretty button that fits your bracelet, I usually prefer antler buttons for their traditional looks - but I've tried everything from plastic to pearls, just play with it, there's no right or wrong, it just have to be able to hold the loop.

Thread your needle with 1/4 of a synthetic sinew strand from the ones we separated before. You might want to use a special leather needle if you have one, but it's not necessary if you just have a good quality needle and a thimble.

In one of the tin threads on the back, insert your needle and pull the thread through and tie the end of your thread to that with at least a good double knot. Leave about 2 or so inches for a thread end, as we'll use it later.

Then bring up your needle just to the right side of your braid. Add your selected button and stick it down again just to the left of the braid. The reason we're doing it around the braid is because this way we help attach the braid to the skin to prevent it from moving, and button is attached to something more sturdy than just the skin. As otherwise the button might rip through the skin after a bit of wear. 

Repeat three or so times until it's well in place, try to use the same holes in the leather to not perforate it needlessly.

Then pull up your thread to the side of the button underneath it, and wrap the thread around the button about three times before sticking it back down to the backside of the braid, still in the same holes if possible.

Then you tighten it all and tie your thread together with the end of the one you tied to the tin with at least a good double knot.

Step 6 - Making and Attaching the Button Loop

Now we'll make the little closing loop from a leather thong. Cut a 1/8" wide and ca 4" long piece of leather.

Clip it open (I do this with my finest scissors as it's too thin to use the rotary cutter, and it doesn't have to be perfectly even) almost all the way through but leave a scant inch uncut. Then wet it thoroughly with regular tap water. Take the clipped ends and twirl them in different directions between your fingers. It is usually easiest if you ask someone to help you.

When it's twirled up really tight, grab the uncut piece, bring the two twirled ends together and it'll roll up to a little thong. Tie it off properly like I've done in the picture with a strand of synthetic sinew and make sure the loop is big enough to go around the button and has a little extra too.

Take the little loop and cut off the excess ends about 1/4" below the knot. Tie one of the ends through the tin in the braid like we did with the button (this will make sure you can't pull out the loop later). 

Tie the loop up tightly and thoroughly around the braid, tie off.

Step 7 - Sewing the Braid to the Backing

Just gluing the braid in place will not last you very long so now we'll properly attach the braid. The glue is mainly there so you can manhandle the braid a bit when sewing it down, without risking it ending up off center.

Take a fairly long piece (about three times the length of your bracelet) of clear nylon thread. Tie one end to your needle (as otherwise you'll be retreading it all the time, it's a slippery bugger ^^) and the other end to a piece of tin like with the button.

Stick up your needle where you see the nylon thread coming up in the picture and then stick down the needle in the way show in the photo. Do it at an angle in under the braid, not next to it as then the holes from the needle will show. I've drawn little black lines where I sewed mine in place. The reason I did it there was so I could nestle the thread in under the skin inlays (or if I didn't have skin inlays, in between the tin threads) to make it invisible. I do one side first and then come back up the other side.

When you've come back up, tie the threads together with the one you first tied with the tin with a bunch of knots to make sure they won't unravel. Hopefully it'll be visible in this photo.

Step 8 - Closing up the Bracelet
Now we're going to sew up the bracelet to finish!
Again, thread your needle with synthetic sinew. Tie one end to a piece of tin (yep, lots of knots there by now) and then stick up your needle from the back to the front in one corner of the braid.

Next bring it over to the other side, this will look a bit off but tighten them so the edges come together and poke a bit at the first corner to make it come up. 

Then dab a little glue on all your knots so they'll for sure stay in place forever, and then start stitching like in the photo with the glue still wet (yep needle will be gluey but it will be worth it). From the  underside and up and then back over from the underside again.

When you're nearly at the end, dab a little glue over your knots again and stitch nearly to the end.

The last stitch you do like the first one straight over and do a couple of stitches in the same place to hold it and then stick the needle into the braid and up further down between your seams and cut the thread there.

Press down on the ends of the braid to get the glue all the way down to the edges and get a neat end. Clamp your ends closed with a clothespin, wonder clip or your fingers until it's somewhat dry - to get your loop centered. If you skip the wonder clips and are in a hurry to get a nice photo of the tutorial you just finished, you'll most likely end up with an off center loop like I did! So please don't do as I do, do as I say ;)


Pat yourself on the back! You've done a fantastic job!  =D

Now you'll actually have to "wear in" your bracelet. This as the leather will be a bit unruly at first, so be careful when you put it on the first few times. Making sure the braid is in the center, and press on it a little to make sure it stays perfectly centered. After you wear it a few times it'll stay place on it's own, and you can just throw it on like any other bracelet.

Enjoy your stunning new bracelet and make many more in different colors so you can mix and match! =)

Feedback on this tutorial is much appreciated and please don't hesitate to ask if anything is unclear! I truly believe you will love making your own, unique Sami Bracelets =)

If you make your own Sami Bracelet or anything from a pattern or tutorial of mine - I'd love if you add it to my Facebook Group and thereby share it with me and the world so we all can enjoy it and be inspired by it.  And don't hesitate to tag me if you post on instagram @pink_pony_design <3

Thursday, September 13, 2012

Simply Mental Stars

Can you forget a quilt top you spent hours and hours on no less then 2 months ago? Well I managed XD The top I named "Simply Mental Stars" was neatly folded away for a photo opportunity later when I got home from the quilt retreat and I completely forgot about it until I saw a similar star on Pinterest yesterday.

Anyhow, introducing Simply Mental Stars:

Didn't have time to take it outdoors and this photo is as close to the actual colors as I could get.

It was really fun to make the stars, the crazy stars require minimal attention and you can make them as "mental" as you'd like =) 

It's made from half a Tonga Treats, Strip Treat - Hard Candy roll. I'm planning to use the rest for borders. It didn't turn out at all like I planned as I ran out of the black fabric so I'm really back and forth when I look at this top. Sometimes I like it, others not at all, it comes and goes. I was planning on adding a skyline applique to the bottom but for now I think I'll fold it back and let it "mature" for a while until I have time to decide what to do with it and then take it from there.

Monday, September 10, 2012

A Rainbow Stash Update!

 Since I've been sick for nearly a month, and covered in work on top of that I haven't got anything creative to share. So I took out my new, oh so pretty rainbow of fat eights for a little photo session, so I would get to stroke some fabric at least ^^

Aren't they just gorgeous!?
I can't beleive such a stunning pile is acutally MINE =D

I just can't wait to get time to start on my color wheel wall quilt I have planned for these beauties! But until then I'm perfectly happy just being able to pat them and look at them from time to time. You've got to love that about fabric, it makes you happy even when you haven't got time to play with it =)