You can of course sew bags on a domestic machine!

I've been more and more often in groups on Facebook and around the net been reading comments such as:

"but if you'll be sewing more than a few bags, you'll need an industrial machine" 

"you'll need an industrial machine if you'll be getting into this hobby" (of sewing bags, my note).

And this is just not true!

These comments make me sad, as I fear it will discourage new bag makers from even considering taking up our wonderful hobby! As most people can't afford, or have the room for an industrial machine.

I just want to make it clear, you do not need an industrial machine to sew bags! 

I ran my business as a bag designer using only a domestic Janome Horizon 7700 up until three years ago! And trust me, I've sewn many, MANY bags. 

Before I bought my Janome I sewed my bags on a Husqvarna Emerald 118 for years - and that worked great too! And I still don't have a full industrial machine. I do work mostly on my Juki TL-2200QVP mini nowadays. But I always test sew all my bag patterns on my Husqvarna Opal 690q before I release, so I still sew on a domestic machine too. As all my designs are intended for the home or domestic sewists.

Yeah you will sooner or later likely run into issues if you have something similar to the Lidl or Ikea Singers, as they're not built to last and you can't do basic things like adjust pressure foot pressure on them, making them a poor choice for bag making. But any decent quality domestic that allows you to adjust pressure foot pressure and you can get a walking foot or teflon foot for, you can use for bag making! 

Thank you for listening and please don't hesitate to ask in the comments, in my Facebook group or in email if you run into any machine related issues when sewing your bags!  

Alternative construction of the Sendai Wallet - Fits A4 sheets of vinyl

 I've had a few requests making it possible to sew the Sedai Wallet from the very popular A4 sheets of vinyl available, so I've got an alternative method of construction here for you making that possible!

 This method is also for those of you who might find step 14 of the pattern a little tricky. This is the Sendai I made using this method. The interior is only slightly different, instead of folds, the middle section is separated to two pieces. Let's get started!

Alternative Construction - Sendai Wallet

The Sendai Wallet pattern is available HERE.

Please just supplement and/or replace the following steps in the pattern with the below. 

Please pardon the lack of buttons in the photos below, I didn't get the right ones til after I'd taken the photos. Please know that the following tutorial won't make sense unless you have the pattern at hand. 

Step 1 - Preparations

Fold the "wings" of the pattern template in half to mark the middle, and then cut them in half along the fold. 

You'll now be able to fit all of the exterior pieces into a single A4 sheet, so you can use such pieces of vinyl. 

Skip steps 10-11

Step - 12

Place your tape along the wrong sides of the long side of the loose "wing sections" instead and tape them in place just below the marks you make in this step according to the pattern (red marks). 

Step - 13

Sew down the taped sections carefully and slowly with 1⁄8” (2mm) seam allowance, leaving long thread tails when you start and stop so you can tie them off. Turn it over and sew from the back of your piece, so you easily can match your seam exactly with the seam already on the back. 

Step - 14

Fold your wallet in half with the lining side out and match up the raw edges of the "wings", clip in place. Sew together the"wing" sections carefully and slowly with 1⁄8” (2mm) seam allowance, leaving long thread tails when you start and stop so you can tie them off. 

It will look like this from above after sewing the wings, just turn the wallet right side out and you're done!

Tada!! You'll now have a beautiful Sendai Wallet! 

If you want to learn exactly how I apply the pretty, iridescent edge paint to this wallet, please see this video: 

Sendai Wallet - Pattern Release!

The Sendai Wallet PDF raw edge wallet pattern is such a cute and quick make! The perfect mini wallet for when you only need to bring the essentials in a beautiful little clutch for a party, or why not put it directly in your back pocket? Also a lovely and quickly whipped up gift for anyone!

It's available in English and Swedish HERE.

The little Sendai is such a fun sew, especially if you use the included SVG file and let your cutting machine do all the "hard" work. Perfect for cork fabric, vinyl, leather, faux leather, kraft paper and more!

It can be sewn unlined or lined depending on how stiff you want your wallet to be. The beautiful printed cork is from: https://www.frameyourbag.com/

A little video intro: 

I recommend that you don't do as I do, but instead do as I say - and do a lined version if you want to use edge coat, this was super tricky to get even somewhat nice on this without a lining. 

~~~~~~~~ ♥ ~~~~~~~~ ♥ ~~~~~~~~ 

My amazing pattern testers were awesome as ever and tested the pattern for me, and they have done such an awesome job! A sincere thank you goes out to each and everyone one of you for helping me make each new pattern - into my best pattern yet!

I'm so very grateful for all your help and hard work, I could not do this without you!

Pia Jestin - can be found here on Instagram made this lovely set of wallets:

Anne-Le Wängelin - whom can be found here on Instagram made these two lovely versions:

Ann Munthe Svensson - whom can be contacted here: ann.b.m.ams@gmail.com made this cute pink version:

Barbara Dörig - Whom can be found here on instagram made this lovely pink version:

Sheri Ferrano - of Munkee Made designs made these beautiful cork versions:

Rimini Ruffle Tote - Pattern Release!

 I'm so excited to share this awesome, rufflelicious (might not be a word but it is now!) tote with you all! The Rimini Ruffle Tote is such a romantic design with the ruffles, but with the right fabric/vinyl, it can be super cool and edgy! It's available in English and Swedish HERE.

This is a large tote that comes in two sizes with plenty of room. Perfect for a day on the beach or on the town. The turquoise colored one on the cover is the regular size, this pink one is the tall size (MORE ruffles! ;) ):

Ruffles back and front!

Look at little Marie in the lining! I love her!

It's fully lined, and it has a generous zipper pocket and a pretty slip pocket inside. 

Finished size tall Rimini: ~17” (45cm) high, ~12” (30cm) wide at the bottom, ~15” (38cm) wide at the top and ~4” (10cm) deep.

The beautiful pearlescent pink vinyl is from Borlänge Sycentrum.

Finished size regular Rimini: ~14” (35cm) high, ~12” (30cm) wide at the bottom, ~15” (38cm) wide at the top and ~4” (10cm) deep.

It has a sturdy bottom which makes it hold its shape very nicely even when fully packed.  

I love this lining fabric, I bought it here on MariColorWorld. 

It has nearly no hardware, the magnetic snap and bag feet are absolutely optional.

It has room for a LOT! 

You can of course make it in a cotton fabric if you prefer, both methods are described in the pattern. If you don't like raw edges/backs on your ruffles, cotton is the way to go. This version is made with quilting cotton from Leafy Greens BlendedThread and a foam interfacing for added stability. 

I added vinyl straps, but the straps can of course ba made in cotton too.

I made a vinyl bottom for the bag to make it a little more resistant in the bottom.

~~~~~~~~ ♥ ~~~~~~~~ ♥ ~~~~~~~~ 

My amazing pattern testers were awesome as ever and tested the pattern for me, and they have done such an awesome job!!! A sincere thank you goes out to each and everyone one of you for helping me make each new pattern - into my best pattern yet!

I'm so very grateful for all your help and hard work, I could not do this without you!

Sofia Nilsson - of TRÅkärlek whom can be found here on Instagram and here on Facebook made a number of gorgeous Rimini Ruffle Totes! More photos to come soon!

This stunning tall cotton and vinyl version:

She also made this super cool regular size black vinyl one:

And she made this adorable custom size mini version! Look at the lace edge on the ruffle!

Eva Halvarsson - of Borlänge Sycentrum made tall this lovely silver vinyl one:

Julia Willman - made this beautiful regular so super soft faux suede version: 

 Camilla Johansson - whom you can find on instagram here made this super cool green snakeskin and black vinyl version! 

Josefin Axelsson - made this adorable, slim ruffled regular version in all cotton:

Baby Faro!

 I couldn't help myself, it had to be done, a matching Baby Faro for my Garden of Utopia Faro FOldover Clutch! The Faro Foldover Clutch pattern is available here. 💗

I'm so excited with how it turned out! It has great body thanks to the Soft & Stable foam interfacing and matches it's "mom" perfectly! The beautiful Garden of Utopia canvas is from The Styled Magnolia.

I made the baby an exact copy of the normal sized one, so the lining is the same color Kona Cotton. 

Aren't they cute together? 

The beautiful copper hardware is EmmalineBags which I bought from Borlänge Sycentrum.